1 / 3
Z-Axis Homing Switch Contact for LDO Voron 0.2 with Kirigami Bed — image 1
1 / 3

Z-Axis Homing Switch Contact for LDO Voron 0.2 with Kirigami Bed

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This add-on part improves the reliablity of z-axis homing in the LDO Voron 0.2 equipped with a Kirigami bed.

Rating
0 / 5
Likes
2
Downloads
14
Makes
0
Views
130
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The z-axis switch on my newly built LDO Voron 0.2 kit wasn't reliably activated during homing moves. I tried adjusting the location of the switch but couldn't find a location that delivered reliable homing. I also tried replacing the stock switch with one that has metal arm but couldn't fit it in the space available. Ultimately, the solution has been to install a small 3D-printed part that has a protrusion positioned underneath the right corner of the left carriage block. The protrusion provides a wider contact surface area for depression of the end stop switch which more reliably activates it during homing moves. The part is held in place by two M2x6 mm cap screws threaded into the bottom two screw holes of the left linear rail carriage block. This model is provided for use by others who might encounter the same problem.  STEP and f3z files are included.  

Printing parameters:  Since this part is located inside the printer chamber, ASA or ABS is advised, although PETG will likely be OK. The model shown in the photos uses a layer height of 0.2mm, 4 wall layers and 40% infill.  The screw hole wells have a single layer of filament that can easily be cleaned away with hobbyist knife or 2mm drill.  

Tags