1 / 4
Kirigami for Rook2020 v2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Revised design of the kirigami bed mount, It's stiffer and more difficult to install
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Please read before downloading:
- You will need to permanently modify a kirigami bed holder (voids waranty)
- Please use another design if you don't want to permanently modify your kirigami
Stuff needed:
| Part Name | Amount Required | Printable? | Recommended Material | Infill Density |
| Bottom rod mount | 2 | Yes | ABS | 100% |
| Top Rod Mount | 2 | Yes | ABS | 100% |
| Adaptor | 1 | Yes | ABS | 100% |
| End stop Hitter | 1 | Yes | ABS | 100% |
| Kirigami | 1 | No Good Luck | Steel - Powder Coated | 100% |
| LM8UU bearing (double length recomended) | 2 | No | Steel | 100% |
| 8mm Linear rod | 2 | No | Chrome- plated hardened Steel | 100% |
| M3 Nutz | 8 | No | Black-anodized Steel | 100% |
| M3 Bolts | 8 | No | Black-anodized Steel | 100% |
Please refer to the CAD file for assembly and orientation
Designed for Rook-2020 (Rolohaun Design)