1 / 4
Kirigami for Rook2020 v2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised design of the kirigami bed mount, It's stiffer and more difficult to install
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please read before downloading:
- You will need to permanently modify a kirigami bed holder (voids waranty)
- Please use another design if you don't want to permanently modify your kirigami
Stuff needed:
| Part Name | Amount Required | Printable? | Recommended Material | Infill Density |
| Bottom rod mount | 2 | Yes | ABS | 100% |
| Top Rod Mount | 2 | Yes | ABS | 100% |
| Adaptor | 1 | Yes | ABS | 100% |
| End stop Hitter | 1 | Yes | ABS | 100% |
| Kirigami | 1 | No Good Luck | Steel - Powder Coated | 100% |
| LM8UU bearing (double length recomended) | 2 | No | Steel | 100% |
| 8mm Linear rod | 2 | No | Chrome- plated hardened Steel | 100% |
| M3 Nutz | 8 | No | Black-anodized Steel | 100% |
| M3 Bolts | 8 | No | Black-anodized Steel | 100% |
Please refer to the CAD file for assembly and orientation
Designed for Rook-2020 (Rolohaun Design)