1 / 3
Voron Zero 5015 Bed Fan for Kirigami bed
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for a 5015 blower bed fan on a Voron Zero kirigami bed
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 75
- Makes
- 1
- Views
- 920
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Before you print:
Make sure you have enough space between the kirigami bracket and the bottom panel of the camber:
- Place your 5015 blower on the bottom panel
- Move the bed all the way down
- The blower should be able to move freely
- The holder doesn't add any height to the blower, so it will fit if the fan has some space to move
How to install:
- tap the 2 3.5mm holes in the Kirigami bracket to M4
- Insert 5015 fan into the holder, no glue or screws needed
- screw the holder to the bottom of the Kirigami bracket with 2 M4 machine screws
- wire up the fan
You can also use M3 screws and nuts instead of tapping the holes, but you probably have to remove the bed for installation