Wardrobe-cabinet-locker feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was making a wardrobe for myself, and of course I 3D printed the feet for it!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I was making a wardrobe for myself, and of course I 3D printed the feet for it!
It is simple and easy to assemble.
27mm high, so that I could wipe the dust from under it, a little.
The diameter of the foot is 29 mm, and the reinforcement is 35mm in diameter.
Use a 5x40 screw for plywood (the picture shows a shorter screw, don't be confused).
I use plywood with 18 mm thickness.
After screwing the foot, I made a ring into which a sticker is stuck to protect the parquet or other floors, and the cabinet is easy to move.
I used adhesive furniture pad protector stickers, with diameter 22mm
They have two models, one with reinforcement in the form of a ring, the other without. Maybe it's too big for you and that ring bothers you, but I think it's even more stable and stronger even though that ring is small.
Nozzle 0.4
Layer is 0.2-0.3
PLA, PET-G….
Happy printing!