Wardrobe-cabinet-locker feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was making a wardrobe for myself, and of course I 3D printed the feet for it!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 40
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I was making a wardrobe for myself, and of course I 3D printed the feet for it!
It is simple and easy to assemble.
27mm high, so that I could wipe the dust from under it, a little.
The diameter of the foot is 29 mm, and the reinforcement is 35mm in diameter.
Use a 5x40 screw for plywood (the picture shows a shorter screw, don't be confused).
I use plywood with 18 mm thickness.
After screwing the foot, I made a ring into which a sticker is stuck to protect the parquet or other floors, and the cabinet is easy to move.
I used adhesive furniture pad protector stickers, with diameter 22mm
They have two models, one with reinforcement in the form of a ring, the other without. Maybe it's too big for you and that ring bothers you, but I think it's even more stable and stronger even though that ring is small.
Nozzle 0.4
Layer is 0.2-0.3
PLA, PET-G….
Happy printing!