Heltec V3 Case - HQ/Home
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love the Heltec V3 cases on here but I wanted something more basic looking for my HQ node.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 1952
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
As stated in the summary - I love the cases that are on here for the Heltec V3 but most of them look more like mobile units - I needed something that was more home module looking.
So I came up with this.
As well as the 3D printed parts you will need:
4 x M3x18mm
4 x M3 Nuts
4 x M3x4mm
The key design aspects here were this would be powered at home so I want the cable to stay in, so the insert clamps the cable to prevent this coming loose. This is a slim-ish design to minimise print time whilst keeping it to the aesthetic I wanted.
I hope you like it!
My plan is to make variants of the pieces here over time so please check back :)
PLEASE NOTE! - Whilst I tried to make it useful to everyone the USB-C charging cable everyone uses might be slightly different so you may need to make some cuts to the plastic - I have accounted for this and made sure that all of these cuts/nicks would be hidden.