1 / 1
Finish Line Bike chain lube Bottle Cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
They switched to some new "child safe" caps a while back, and they break super easily now. After one spilled bottle in…
- Ocena
- 4,857 / 5
- Polubienia
- 22
- Pobrania
- 68
- Wydruki
- 6
- Wyświetlenia
- 529
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 6) (Komentarze: 13)Remiksy (1)Kolekcje (21)Powiązane
They switched to some new "child safe" caps a while back, and they break super easily now. After one spilled bottle in my workshop, I decided to design and print a new one :D
Prints fine without support. Use a low resolution like 0.2mm to get a nice thread on the inside. Because the footprint is fairly small, you maybe need to use a brim if your bed adhesion is not that good.