Sectional containers/pillboxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 different sizes with 6 or 8 sections
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 88
- Wydruki
- 3
- Wyświetlenia
- 777
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A sectional container for storage of small objects such as screws. It can also be used as a pillbox. It can be printed with either 6 or 8 sections in 3 sizes: small (50mm), medium (100mm), and large (150mm). There is also a small protrusion on the bottom of the cover to make the opening hold in place over a specific section.
You don't really need glue for the assembly (I didn't use any), but if the pin is too loose you can either scale it up (like 1% or something) or glue it with a gap filling glue.
Printed at 0.2 mm layer height. No supports required.