557 modeli
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
5-6 color print of the Earth with stand and x-section cut away Based off this Thing - Multi-Color World with Stand Space in the base to glue in this style magnet Print instructions Based off this Thing - Multi-Color World with Stand…
Wydruk około 14,97 €–18,29 € nettoWstępna wycena jednego wariantu
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 8,41 €–10,27 € nettoWstępna wycena jednego wariantu
This is the Star Trek Section 31 Stealth Ship seen in Star Trek Discovery show. The model was designed by me in a way that the single parts can easily be printed and that you don't need to paint the model. Some of the parts can also be…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
Electric Grid Wargames Wall Sections - Section 2 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Wydruk około 6,18 €–7,56 € nettoWstępna wycena jednego wariantu
Wargame Walls Fan Room Version 2 Section 15 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 7,11 €–8,68 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
Wargame Walls Barricades Section 12 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena jednego wariantu
This is a replacement or addition section for Glow Tracks. If you want to add some more sections to your existing Track, or to replace some missing parts, this is the way to go! I made a model with custom supports to provide a perfect fit…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Wydruk około 7,64 €–9,34 € nettoWstępna wycena jednego wariantu
Wargame Walls Fan Room Section 14 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 6,71 €–8,20 € nettoWstępna wycena jednego wariantu
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Wargame Walls Pump Section 11 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the fight!…
Wydruk około 6,48 €–7,92 € nettoWstępna wycena jednego wariantu
Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 9,24 €–11,30 € nettoWstępna wycena jednego wariantu
Wargames Wall Coolant Tank - Section 9 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 6,53 €–7,98 € nettoWstępna wycena jednego wariantu
Armoured Room Wargames Wall - Section 7 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
Wargames Wall Damaged-1 - Section 10 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 8,09 €–9,89 € nettoWstępna wycena jednego wariantu
Wargame Walls Collapsed Pipes Section 17 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 7,63 €–9,32 € nettoWstępna wycena jednego wariantu
Wargame Walls Thick Section 18 Because the fight goes on in the deep, dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part, citizen! Print these out today! Show your worth! Get back in the fight!…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena jednego wariantu
Pass Through Armoured Wargames Wall - Section 6 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Armoured Wargame Walls Sections - Section 4 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
Simple but interesting some mathematical stuff. Explain in word can take to much time, so I attached graphic which explain basic. For more information i propose look a topic conic section. If you have any comments feel free to contact me.…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Wargames Wall Blank - Section 5 Build your own wall or use them blank! Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today!…
Wydruk około 4,53 €–5,53 € nettoWstępna wycena jednego wariantu
Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
The modular RC model airplane is a collection of parts and sections for a homemade remote controlled model aircraft. It is for people that want to build their own experimental RC airplane, printing all essential parts on a 3D printer. It…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A conic section is a classic mathematics visualization tool demonstrating intersections between a cone and a plane. https://en.wikipedia.org/wiki/Conic_section This model has 2mm lines along each conic outlining the circle, ellipse,…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Guide A has a hinged (non removable) box section and a fixture for the lid I used a kitchen sponge, cut out a rectangle (28x9x6mm) from it and pierced filament through it. After that guide the filament through the guides opening, place…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
The Wild Book Mark is a cross section of a random shape I created. Make sure the module is scaled to inches. Print at your regular print settings.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
this model will test stringing, accuracy and acceleration control. i put my mk4 at a big disadvantage by using wet filament and pushing the speed limits
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Insert the magnets after the print is finish (6x3mm)
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Simple little bin that's great for storing long, skinny, things, like precision screwdrivers, xacto knives, pens, tweezers, paint brushes, etc. Overall dimensions: 120 x 77.6mm Each section is 28(w) x 46(d) x 74.6(h)mm Uses the 4mm…
Remixed from m*bergman's excellent Stryker lineup, which is in real life a remix of the GDLS LAV 3. The LAV 6 ISC is the latest in-service version of the mowag piranha lineup, which entered service in 1974. (…
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
A little less boxy style pen/pencil holder to attach to your IKEA Skadis pegboard. Comes in 3 version with 2 and 3 dividers. Requires glue or 3DGloop to attach the ‘peg hooks’ to the back. Print without any supports or brim.
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Adapted from: https://www.thingiverse.com/thing:583489 I wanted the print to be in different colors and larger than my printbed so I printed it in parts and then painted it. Ends up I am no good with painting and even though I clamped the…
Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…
light leakage cover for the autodarts led ring. its a remix and fixing a small gap in the original model by COY5.
🇮🇹 Architectural Wonder This model was created by Logan MDR The original MiniWorld3D Florence Cathedral model has been one of the most popular ones for many years – here is a fresh new approach, sure to catch the attention of both…
A model showcasing the differences between healthy bone and bone that has lost some of its density through osteoporosis or time in space without enough exercise as a cross-section. The models are slightly zoomed-in compared to the actual…
The LAV III Kodiak is a GDLS development of the Mowag Piranha initially introduced in 1974. This lav 3 is a remix of the excellent m bergman's Stryker vehicle lineup, which is itself in real life a remix of the GDLS LAV 3 lineup! I've…
Have removed the central section of jamundsen's model ( https://www.thingiverse.com/thing:459709 ) to make it more screen accurate. Supports are not needed for this model, I'd suggest printing slow towards the top. Use a 10mm brim for…
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
Due to the heigh permittable in the K2 Plus, I've made a chamber section that is double the height. From the original you will still need to get 7 of the cmag mesh files, so please support thrutheframe by visiting the original page to…
Over a meter tall model of Nelson's flagship. Easily printable model with few organic supports with layers of 0.1 and 0.15 To make the rigging I used 1.5mm modeling rope and a thinner one for the linkage. To create the upper meshes of the…
Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…
THE THREE-SECTION CONNECTOR ALLOWS THREE TUBES TO BE CONNECTED INTO A STRONG CONSTRUCTION
this a lego train track intersection [for legos only not duplo] I hope it helps you will need to break off the little tabs at the end of each rail print setting supports:no infill:15% filament:pla printer:prusa mk4
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
I had a hard time printing the filtered base in PETG, as it didnt like the tiny holes. I opted to redesign that part to have slots instead. it now resembles more of a floor drain design and should be easier to print in PETG.
Rail section off of https://www.thingiverse.com/thing:5332248 Category: 3D Printer Accessories
Sta Trek Discovery Badge for Section 31. Print it at 150% for hand badge (Section 31 really never use the badge in the uniform) Print it standing in two colors, then join the parts.
pencil cup (v2!!) my sister needed a pencil cup so I decided to make a variation of my gridfinity tray into one. like that, this has an outer, gridfinity-compatible base, and three removable inner cups. the two smaller internal cups are…
You should print 6 of the disks, 3 of the tubes, and 4 of the plugs. Then assemble them onto an EEW 6.x bobbin. The plugs get inserted to hold these from spinning on the bobbin. Then you can spin small amounts of different singles onto a…
My mod for “ Under Desk Drawer by Paul ” the same mounting holes.
About: Magnetic HEPA filter for the X1C which attaches to the exhaust fan in the back. This almost el i minates the PLA/PETG smell as well as making the fan significantly more quiet. This model has an index point for the proper alignment…
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
First model uploaded. I couldn't find a mail holder I liked with enough slots or that needed to not be secured to anything. So I made this on Onshape. Slicer was Creality Print. Printed on a K1C at 50% infill, high quality .25 and slow…
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
3D parts for Starship S24 papermodel for the AXM Paper Models website. Parts consists of the Raptor engine floor, 3 sea level Raptors and 3 Raptor Vacuum engines. Scale is 1:100 How to print: no need for supports. The only file that needs…
3D model of the SuperHeavy B7 engine section with skirt and Raptors for the B7 papermodel from AXM Paper Models website. It consists of the engine skirt and Raptor covers with nozzles. B7 has 33 Raptors. How to print: the only file that…
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you…
(For smaller illustration models, look here: https://www.printables.com/model/675613-steel-profiles-illustration-models ) All STL files are according to standards shown below. Print info: - All stl's are 100mm in height - Print upright,…
Ruined stone modular section Introducing the Ruined Stone Construction, a meticulously crafted and versatile miniature terrain piece designed for epic tabletop battles in games such as Mordheim, Warhammer, Dungeons and Dragons, and more.…
3D parts for Starship S28 papermodel for the AXM Paper Models website. This engine section is good for Starships S25, S26, S28, S29, S30 and S31. Parts consists of the Raptor engine floor, 3 sea level Raptors and 3 Raptor Vacuum engines.…
These are straight sections for LED “neon” strip, I was looking for something to hold the strip in straight sections in my 3D printer enclosure but couldn't find anything for LED Neon so I made these myself in Onshape - this is my first…
There is something mesmerizing in the sound of railroad car wheels clicking as they pass through the diamonds of railroad track crossovers. Here is a crossover section for use with the Hume track system. See…
Bonjour, Je suis enseignant et formateur de secourisme en France (PSC1 et SST). Pour enseigner comment savoir si une personne respire j'utilise ceci : la coupe de tête. Cela permet de faire comprendre aux apprenants l’intérêt de basculer…
I was missing a few parts for the hotend model by Agustin. So I made a screw for the heater, a setscrew for the thermistor. And a cut away version of the ptfe liner. I also uploaded a stand that I made for it. Do keep in mind that the…
HSW trapezoid wall piece with one side at a 30 deg angle. The code can be also used to generate triangular pieces.
3D model of the SuperHeavy B10 engine section with updated skirt and Raptors for the B10 papermodel from AXM Paper Models website. Contents: one engine skirt, one interior wall and floor, 33 Raptor nozzles and 13 Raptor covers. How to…
Despite the description listing the HEPA filter size as 40x80, they did not fit. They measure 42.5x82. Therefore, I made a quick modification to get the perfect fit. Link to the filters: https://amzn.to/3kUNwwO
Section divider for Ikea Kallax. Needs 8 dividers that interlock together. I have made this in wood, and it works great as an amiibo divider. I still have not been able to print because print is too big. See wood example:…
Had one of the springy parts of the "middle-section" break and noticed it was designed with sharp 90 degree cuts at the weakest point(which is where it snapped). So I added fillets to hopefully improve longevity of the part. I also cut a…
Sada dvou jednoduchých měrek k měření průřezu vodičů elektrických kabelů v rozsahu 1.5-10 a 16-70mm2 Měření spočívá v postupném nasouvání měrky danného rozsahu na měření vodič BEZ izolace. Po dosažení průřezu měřeného vodiče-měrka již…
Remixed from Martin's model to remove carbon lace and replaced it with the standard plate armor.
Description: Elevate your space with the 'Cosmic Intersection', a 3D printable design that captures the essence of sacred geometry. This piece intertwines circles and lines to create an emblem of cosmic connectivity, symbolizing the…
Ich brauchte etwas, um in Zählerkästen und Unterverteilungen die Kabelquerschnitte bestimmen zu können - und zwar tunlichst ohne abschalten zu müssen. Mit den im Handel erhältlichen Schablonen kommt man nicht zwischen die Kabel solange…
A remix of Martin's Rocinante rear section. Included are rear sections with and without landing gear mounts.
The coin compartment is removed and the card compartment is 0.5mm slimmer. This is because in the U.S., or at least in my state, driver's licenses are 0.5 thinner than other cards. This means you can use 2 regular cards plus your license…
There a two types of roller, one with bearings and one without them but i think they are necessary considered the weight. BOM: n° 1 M8 threaded rod ( for a single "Section" use about 155 mm of rod) n° 8 washers for 1 section n° 4…
Section dividers for Keter Pro Cantilever Organizer to separate contents of the smaller (top level) removable bins Original The original version is a simple sliding divider to help separate the contents of a bin. Full Bin Insert…
Parthenon 1:100 Scale Model - Corner Section This is a scale model of the front left corner section of the Parthenon, modelled precisely to known dimensions from various archaeological studies of the original. It consists of the crepidoma…
This is a remix of Chess Board thing by TwistedDaylight. I liked the design and I thought it could be easier to print and would be more substantial. I had a few issues with getting it all to fit. I had to resize the yellow tiles so they…
I wanted a learning-aid to explain the filament path in my printer. This can give a student a clear mental picture of the inner workings of the hotend. I can't seem to find the original source of these models. I believe they were directly…
Another part for marble playsets. Use supports from build plate only. I put a rib between the wraps to handle it from there. Print instructions Category: Toy & Game Accessories Summary Another part for marble playsets. Use supports from…
The first part is easy, print the original (sans legs and supports) print these glue and paint. The next sections will get more involved. In general I prime with fine gray primer, the matte black or tire black and then the orange on top.…
This is a simple old timber set of rails that you can use as you like in your model scenery creations. Having built scalecast ( www.scalecast.co.uk ) over the past 12 years, I love making 3d stuff and just want to keep sharing stuff to…
Just a quick remix of D1024's Skadis Container Divider model. I need one that just had a single divider on the longer axis of the container, so made this real quick for my organization system, and figured I should upload and share.
Honeycomb storage wall section that i cut off a few hexagons and now it is 88mm X 82mm so that it can fit on smaller print bed sizes. Please post a make if you made it!
One Piece T-Track 4-way Intersection Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. Instead of paying upwards to $25 per intersection on your assembly table, just print your own for a few…
I made this simple LED strip holder / straight section for the Phanteks Neon LED strips ( https://a.co/d/9oWwbQO ) on Amazon. I did not think the kit came with enough to keep the LED strip straight The strip fits nice and snug. no support…
I printed it in PETG with 0.3 mm layers, 100% infill.
The complete set of Stemfie3D beams with square ends and box-section, ranging from one to ten block units. STEMFIE news 👉 x.com/stemfie3d
A sectional container for storage of small objects such as screws. It can also be used as a pillbox. It can be printed with either 6 or 8 sections in 3 sizes: small (50mm), medium (100mm), and large (150mm). There is also a small…
I bought a wall mount for my Playstation5 and while the stand is solid and the PS5 is kind of locked into place at the base of the wall mount, there is only the little 3mm screw preventing it from tilting and breaking of the stand. Since…
A user on the Facebook group "Avro Arrow" saw some in-progress images of my print of my full CF-105 model and suggested I create a model of the nose section of the RL-206 example of the Arrow in honor of the remains of that plane that are…
