1 / 6
8-LED neopixel strip mount for 2020 extrusion (CR-6 SE) — zdjęcie 1
1 / 6

8-LED neopixel strip mount for 2020 extrusion (CR-6 SE)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows you to mount an Adafruit 8-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I…

Ocena
4 / 5
Polubienia
30
Pobrania
106
Wydruki
1
Wyświetlenia
1277
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This allows you to mount an Adafruit 8-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I developed this for the Creality CR-6 SE, but it should work on any Ender 3-like printer with a 2020-extrusion.

There is also a cable clip included which might come in handy.

Check my full installation guide!

Step/Fusion360 files are included to allow further customization.

Bill of materials

  • 2 M3 T-nuts (can also be printed)
  • 2 M3x8 screws

    Print Settings

Printer:

Creality CR-6 SE

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: Creality HPPLA Gray Post-Printing

Press the neopixel into the printed part.
Put the screws in and the T-nuts on.

Attach it to your gantry.

Category: 3D Printer Accessories

Tagi