8-LED neopixel strip mount for 2020 extrusion (CR-6 SE)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows you to mount an Adafruit 8-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I…
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 106
- Makes
- 1
- Views
- 1,277
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This allows you to mount an Adafruit 8-pixel neopixel ring to a 2020 extrusion, for instance your gantry. In my case I developed this for the Creality CR-6 SE, but it should work on any Ender 3-like printer with a 2020-extrusion.
There is also a cable clip included which might come in handy.
Check my full installation guide!
Step/Fusion360 files are included to allow further customization.
Bill of materials
- 2 M3 T-nuts (can also be printed)
- 2 M3x8 screws
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
No
Resolution:
200
20
Filament: Creality HPPLA Gray Post-Printing
Press the neopixel into the printed part.
Put the screws in and the T-nuts on.
Attach it to your gantry.
Category: 3D Printer Accessories