1 / 3
Bit holder for Bosch GSR 18v, magnetic 8x3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bit holder for up to 8 bits. For Bosch GSR 18v drill. With magnet insert 8x3.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (11)Powiązane
Part compatielbe with Bosch 18v drill (GSR, GDR). Uses existing assembly geometry on drill for stable mounting. Up to 8 bits can be stored.
Tips for Printing:
Print with taps orientated towards print plate.
No support needed.
Printing material can be PLA or PETG.
Additionall assembly parts needed:
- 4 magnets 8x3 (diameter 8mm, height 3mm)
- 1 screw M4 x8
Assembly:
- Press magnets into position. They will hold in place.
- Mount with M4 onto drill