Parametric, Stackable Wire Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stack spools of any size!
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 107
- Wydruki
- 2
- Wyświetlenia
- 531
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Source code is available on SourceHut:
https://git.sr.ht/~agausmann/3dp/tree/master/item/organization/stackable_wire_holder_v2
Features:
- Parametric OpenSCAD script, compatible with OpenSCAD Customizer.
You can customize:- Spool diameter
- Spool widths
- Number of spools
- Many other model features: wall thickness, divider width, wire hole size
- Stackable - Locating features on the top and bottom for stability.
(Works best when the parts are both designed for the same spool diameter)
Printer setup:
- Printer: Prusa i3 MK3S+ with Revo hotend
- Filament: PETG
- Nozzle: 0.6mm
Slicer configuration:
- Layer height: 0.3mm
- Perimeter width: 1.05mm
- External perimeter width: 1.05mm
This is one of my first prints using a 0.6mm nozzle.
With the default perimeter width (0.65mm), the slicer was not doing very well with the T junction in the walls, and it created some blemishes. (You can see it in the one holding the multicolor wire).
By tweaking the perimeter width to 1.05mm, I got much better walls, and also shaved off an hour of printing time!
0.4mm nozzle should also work fine. In my experience, 0.4 nozzle is great for 2mm wall thickness, but I haven't tested it with this exact model yet.