1 / 4
Parametric, Stackable Wire Spool Holder — image 1
1 / 4

Parametric, Stackable Wire Spool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stack spools of any size!

Rating
5 / 5
Likes
13
Downloads
107
Makes
2
Views
531
Reviews
2

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Source code is available on SourceHut:
https://git.sr.ht/~agausmann/3dp/tree/master/item/organization/stackable_wire_holder_v2

Features:

  • Parametric OpenSCAD script, compatible with OpenSCAD Customizer.
    You can customize:
    • Spool diameter
    • Spool widths
    • Number of spools
    • Many other model features: wall thickness, divider width, wire hole size
  • Stackable - Locating features on the top and bottom for stability.
    (Works best when the parts are both designed for the same spool diameter)

Printer setup:

  • Printer: Prusa i3 MK3S+ with Revo hotend
  • Filament: PETG
  • Nozzle: 0.6mm

Slicer configuration:

  • Layer height: 0.3mm
  • Perimeter width: 1.05mm
  • External perimeter width: 1.05mm

This is one of my first prints using a 0.6mm nozzle.

With the default perimeter width (0.65mm), the slicer was not doing very well with the T junction in the walls, and it created some blemishes. (You can see it in the one holding the multicolor wire). 

By tweaking the perimeter width to 1.05mm, I got much better walls, and also shaved off an hour of printing time!

0.4mm nozzle should also work fine. In my experience, 0.4 nozzle is great for 2mm wall thickness, but I haven't tested it with this exact model yet.

 

 

Tags