X.Y escher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My version of misans brilliant design. It can use a full A3 size all the rod ends are clamped and I have added x and y…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My version of misans brilliant design. It can use a full A3 size all the rod ends are clamped and I have added x and y minimum endstops and strengthened the pen holder and added a return spring to the pen carriage.I have updated grbl to 0.9j and it is pre configured. If I have forgotten any parts off the list please let me know.
8 x LM8UU
10 x F623ZZ
2X 624 BEARINGS
4 X 8MM X 500MM SMOOTH RODS
2X 4MM X 100 SMOOTH ROD
2 X M8 X 470MM THREADED ROD
8 X M8 NUTS
8X 8MM WASHERS
25X M3 CAP HEAD BOLTS
25X M3 NUTS
9X M3 NYLON LOCK NUTS
10X M3 WASHERS
4X 3MM WOOD SCREWS
1X SG90 SERVO
1X 40MM LONG SPRING (5MM ID)
1X ARDUINO UNO
1X CNC SHIELD
2X NEMA 17 STEPPER MOTORS
2X KW11-3Z MICROSWITCHES
2X GT2 20 TOOTH PULLEYS
2.5 METERS GT2 BELT
1X 3 AMP 12V PSU
Software:
Inkscape https://inkscape.org/en/release/0.91/platforms/
universal gcode sender http://bit.ly/1DkClRW
Inkscape gcode extension https://github.com/misan/laser-gcode-exporter-inkscape-plugin
Print Settings
Printer:
big printer
Rafts:
No
Supports:
Yes
Resolution:
0.26
Infill:
40%
Notes:
Use supports at your own discretion depending on how well your printer bridges.
Category: Robotics