Dyson v8 head roller bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece broke and made the motor not to fit correctly, therefore the head didnt spin. So I fixed it myself
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 628
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
So a piece broke and made the motor not to fit correctly, therefore the head didnt spin. This is the piece:
Located in this side of the head:
I used this video for disassembly, really useful:
Although after a certain point in the dissasembly process he ignores the part I had broken and focuses on the motor, so to reach that part you'll need to detach the cables from the motor and remove this rubber piece:
Then take the cables out through the center, leaving space to insert the TOOL (printed file, I used PLA for this piece, but it can be PETG as well). This tool allows for the dissassembly process to continue without spending 30 more minutes trying to figure out how to take those 2 pieces apart, like I did.
When you finally reach the piece to be replaced, then you can print it, I used PETG because it can be more resistent material than PLA, feel free to test other things:
Insert it, and assemble the whole thing. Worked perfectly and had no issues.
If you have any questions or problems during the process, feel free to ask.