1 / 1
Throw Lever Leupold VX-I Rifle Scope 3-9x 40mm — zdjęcie 1

Throw Lever Leupold VX-I Rifle Scope 3-9x 40mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Throw Lever for Leupold VX-I Rifle Scope 3-9x 40mm

Ocena
0 / 5
Polubienia
9
Pobrania
146
Wydruki
0
Wyświetlenia
936
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I used a 7/64 drill bit on the thin side enabling a small wood screw to pass through. 

Use a 5/64th bit to pre-drill the lever side. 

 

Drilling is required to prevent splitting. Super Glue can reinforce the thinner side if needed. 

 

 

30% infil - 2 walls - .2mm layer height. Takes about 12mins to print. 

 

Non-commercial use.