1 / 1
Throw Lever Leupold VX-I Rifle Scope 3-9x 40mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Throw Lever for Leupold VX-I Rifle Scope 3-9x 40mm
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 146
- Makes
- 0
- Views
- 936
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used a 7/64 drill bit on the thin side enabling a small wood screw to pass through.
Use a 5/64th bit to pre-drill the lever side.
Drilling is required to prevent splitting. Super Glue can reinforce the thinner side if needed.
30% infil - 2 walls - .2mm layer height. Takes about 12mins to print.
Non-commercial use.