1 / 8
NES to Famicom (72-pin to 60-pin) converter cartridge Shell/Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shell for a NES to Famicom converter
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 396
- Wydruki
- 7
- Wyświetlenia
- 2194
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 16)Remiksy (0)Kolekcje (56)Powiązane
I was asked if I could help someone out with making a shell that fits a NES to Famicom converter ( non-affiliate link: https://aliexpress.com/item/1005002506286371.html ).
This is a 2 part shell, which "slides" together, and is being held tightly by 2x m3x8 screws (and square nuts), that's all you need!
I printed mine in 0.3mm layer height, with supports (on build plate only; prusaslicer).
Category: Video Games