Macintosh Plus - Battery door cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modelled in 2 parts for Strength! Print the hinge sideways, to make advantage of the strength of the layers, as the…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Modelled in 2 parts for Strength!
Print the hinge sideways, to make advantage of the strength of the layers, as the piece needs to bend to get into place (and printing up-right will likely result in the piece snapping off!).
First Picture shows a glued + sanded/primed version I made.
The 2nd image shows the layer lines in the parallel direction, and how it retains strength & tension.
Remixed from: https://www.thingiverse.com/thing:3060333
Update 4/17/2020
Updated tolerances, as it was found to be quite a tight fit previously
Print Settings
Printer Brand:
Anet
Printer:
A8
No
Supports:
Yes
0.2mm
Infill:
none
Assembly
Design is made in 2 parts for extra strength to the hinge, and allowing tension properly.
You'll have to glue (I am using clear epoxy glue - I'm guessing superglue works as well) the pieces in place.
You might wanna consider filling/sanding the surface for a quick paintjob to make it look uniform with the rest of the housing.
Category: Video Games