MoldMate for Multi Shot Keycaps (artisankeycaps) by xCaps (makenmodify)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool for making multi shot artisan keycaps. The tool helps you to keep the mold in the wanted rotation.…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a tool for making multi shot artisan keycaps.
The tool helps you to keep the mold in the wanted rotation.
There are two versions and two sizes:
Stepped version:
- gives you reproducible steps
- holds mold reliably even at 90°
locked into certain angles ### Basic version:
gives you the most flexibility
- less steady at 90°
angles harder to reproduce ### Sizes:
one version for 32mm molds (plus 1mm clearance)
one version for 41mm molds (like $ynth molds, also 1mm clearance) If you need a special size just let me know ;)
Print instructions:
Flip the balls 180° an print it on the flat side - no support is needed as long as your printer dose reasonably well at bridging. Since the parts hold no weight you can go low on the infill.
Category: Tool Holders & Boxes