Liczymy pasujące modele…
The Cuddlefish model is from Foppemoa's Subnautica Cuddlefish and it is heavily modified in Blender. Printing Suggestions I suggest a very low layer height to maintain the detail and to get a nice finish on the print. I used a varying…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is a simple cable holder for the kitchenaid model: ARTISAN. To mount it, simply loosen the screws on the back and screw on the cable holder with these screws.
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Two types of Gopher keycaps: Standard Magician I printed them in resin and I would recommend resin print these keycaps if you can, so as to both capture the finest details and avoid support/tolerance issues
This is a step up ring that adapts 39mm lens filter threads to 58mm. The TTArtisan AF 27mm f/2.8 uses the odd 39mm thread, and I wasn't willing to hunt down and buy another CPL filter, so I want ahead and designed my own. This is printed…
Small project in the weekend. Amazed by the Ender 3. Printed with 0.4 nozzle and the following Cura Settings: Head and Antenna: Layer height 0.08 No Brim, no Raft, no Support Maximum resolution 0.05 Maximum Travel resolution 0.05 Maximum…
Jump into some froggy fun with these custom-designed keycaps! 🐸 🖱 MX System Compatible This project includes four STL files featuring two types of adorable froggy keycaps: 1U Froggy Keycap – Perfect for single keys 2U Froggy Keycap –…
Protect, store, or gift wrap your artisan (or not) keycaps with this simple storage box. Has additional clearance on sides for both bigger than standard designs, as well as for easy removal with the gaps on all 4 sides. Be aware your…
IMPORTANT: This thing is not yet fully ready for use. I do not recommend printing this yet. I haven’t even printed it yet. There is a bunch of development and testing I need to do first. This is based off of some ideas from…
This is a mount for Rubbermaid 21-cup containers. These are often used for creating DIY filament dry boxes and there are several designs for them on Thingiverse. The one I use is a modified version of this one:…
10-08-2025 M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt ------------- 26-01-2025 3DN7 bolt and nozzle set added --- 13-11-2024 AAP01 barrel adapters parts have been added for now all file options have been…
This is a mount for my Snapmaker Artisan controller to raise it up and tilt it at an angle to make it easier to use. It is in two parts; the top attaches to the bottom by removing the two M3 screws and replacing them with longer ones, and…
23-09-2025 update hi flow ramp piece have been added i have not tested this jet but it should help with the air flow, and there for the joule/ FPS. and maybe lower PSI range cycling. ---- 2-09-2015 update FA parts and PDF notes have been…
Introducing the Artisan Fresh 3D Printed Cheese Keeper – a revolutionary way to store your favorite cheeses with style and convenience! Designed with innovation in mind, this unique container boasts smart print-in-place snaplocks for an…
Lenshood for your Fujifilm Camera with this Lens. Its better then the original because you can loose the lenscap with force from the side. scale the cap in different sizes and prrint them out. you can print it bigger then it needs to be…
TT Artisan 100mm F/2.8 "Trioplan" to copal No.1 adapter Cover 6x9/instax wide after conversion
IMPORTANT: This thing is not yet fully ready for use. I do not recommend printing this yet. I haven’t even printed it yet. There is a bunch of development and testing I need to do first. This is based off of some ideas from…
The Snapmaker Artisan is a HUGE machine and I recall finding a table to support it was a huge challenge. I made this design a couple of years ago and it continues to hold up great. I wanted to share it for others. It just uses 2x4s and…
Remix of https://www.thingiverse.com/thing:6401198 The beauty of this mount (as well as the original design) is that it mounts to the bed, keeping the print itself in a static frame of reference so you can actually get stable timelapse…
This is a mount for Rubbermaid 21-cup containers. These are often used for creating DIY filament dry boxes and there are several designs for them on Thingiverse. The one I use is a modified version of this one:…
TTArtisan 35mm Viewfinder cold shoe since the original one included in the infidex files was too snug. Including the insert in this page too. print at .1mm and might have to sand/rub one corner of the insert to have a snug fit.
(SF bolt checked: works with the SF bolt ) this model is designed for the MKII version of the FGC6 but it should also clear the MKI model. also a note this folding stock is compatible with the FGC6SF models credit note: most parts in this…
(SF bolt checked: works with the SF bolt ) -------------------------------------- realism note. this is not a option on the real model this replica model is fully 3d printed made to look like the real version. I would print this solid. in…
this set got the parts to make a FGC-9 styled MKI and MKII butt stock. materials needed for MKI 1x M4 30mm long for MKII 2x M3 16mm bolts for butt pad 1x M4 30mm long
the butt stocks it self are Compatible with both the FGC6 MKI and MKII models but the buffer tube is only for the partisan 6 model
the butt pad will be assembled the same way as the original
10-08-2025 M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt ------------- 26-01-2025 3DN7 bolt and nozzle set added --- 13-11-2024 AAP01 barrel adapters parts have been added for now all file options have been…
Secure jar with the threaded lid for the TTArtisan 27/2.8 storage. Has enough space to glue in the felt. Hasn't enough space to store the lens with the lens hood. I just doesn't use it.
If you ever need some case to ship your artisan keycaps, got you bro! print it without support! It should be snap fit if your printer well calibrated!
Spool Holder for the Snapmaker Artisan Enclosure. Use any 1, 3, 5 kg spool on the side of the enclosure. Use the included Rod or a piece of ¼ in rod to put 608 bearings and allow the spool to roll smoothly. This holder is entirely surface…
A stackable artisan case to hold all your precious resin. Comes complete with a stand if you don't want to stack them! Edit 06/29/2020: Added a version that supports an acrylic lid(stackable_artisan_case_for_lid.stl), made from 1.5mm…
Hello, coffee enthusiasts! I’ve designed a custom drawer tailored for the Brewista Artisan 900ml model. While it was initially created for the Fellow Tally Pro scale, it’s also compatible with any scale measuring 180mm in length, 154mm in…
Everything is printable without supports. Print the Seal out of TPU. You will need 3x M3x35mm screws for the hinge and latches. If you are experiencing too tight of a fit when closing the box, try scaling down the seal in the Z direction…
Everything is printable without supports. Print the Seal and all the parts labeled “inserts” out of TPU, print the inserts with 0 top layers, 1 perimeter and 10% gyroid infill. Cut the two long inserts to length after printing, they are a…
This is a mount for my Snapmaker Artisan controller to raise it up and tilt it at an angle to make it easier to use. It is in two parts; the top attaches to the bottom by removing the two M3 screws and replacing them with longer ones, and…
Gridfinity dimensions: 2x3 Hole diameter: 57 mm Tested with: TTArtisan 27mm f/2.8 TTArtisan 56mm f/1.8
I use TPU a lot, and this is difficult for the Artisan, because there is a gap between the feed mechanism and the hotend. This gap is visible on the cover photo on the second extruder: The white filament is visible in this gap. Flex…
I needed to put stuff on the enclosure, but it is limited to how much you can put on it. Using these, the weight is transferred to the frame, which can take much more. I printed them in (surprise) TPU with little infill so that they will…
Gridfinity 1x1 bin for TTArtisan Mini LED products: https://ttartisan.store/collections/led-light Height: 4u (28mm)
A ring with a finger groove (and also a lever thing) that helps you focus with one hand easier and faster. Also helps you memorize which focus ring position gives which focus distance. My lens is a Fuji X mount, there's a chance it may…
This is an keycap display case i made to be carved using a wood carving machine. I dont see any reason it could not also be 3d printed but I have not tried yet. I plan to experiment with angling the individual platforms each keycap sits…
Connect 38mm vacuum hose to get fresh air for laser cooling fan. I have mounted mine with 2 of the laser top cover screws. I have the vacuum hose coming though a hole that I drilled to the tabletop. Printed with supports using PETG for…
V.2 Updated - Adjusted the stem to 4mm width and added chemfer -------------------------------------------------------------------------------------- This is a simple 3 * 4 artisan keycaps storage box with cover. I printed the cover with…
A box organizer for Architects of the West Kingdom with the Age of Artisans expansion. Features: Box lid closes nearly all the way, even with the score pad. There's only around 1-2mm of lift (which will only get better each time you tear…
The TTArtisan Super mini LED light is a compact light which magnetically attached to the cold shoe mount on your camera. The light itself is a easy way to add light when you need it but unfortunately it has a power button which is very…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
It goes on the front of the metal on the bed. There is a square hole for custom mounts. I forgot about the enclosure door though so it is perfect for those without the enclosure. It wont damage the door, just open it every time it goes to…
This set of 3D-printable files is designed to modify the TTArtisan 75mm f/1.5 lens into a cinema-style housing. The custom components include a geared focus ring, iris ring, and a unified outer barrel design for improved handling and…
I needed a small artisan keycaps case with a sleek design. So I created this for holding 6 keycaps in a row. Each spot is 19 x 19 mm and is printed in PLA with a color change. Support: Yes, they are needed for the slant The design is…
This is a focusing tab for the manual focus camera lens TTartisan 23mm f/1.4 The ring fits snugly over the focusing barrel and aligns with the grooves for a secure fit. It has a little lip so that it fits into place and doesn't move too…
Guess who bought a Fuji X-mount 7Artisans T.105 cine lens & thought you could buy a replacement ring to swap it to a sony mount... Anywho, I ended up making this which works fantastic! Printed in carbon fiber 100% infill. PETG variant…
23-09-2025 update hi flow ramp piece have been added i have not tested this jet but it should help with the air flow, and there for the joule/ FPS. and maybe lower PSI range cycling. ---- 2-09-2015 update FA parts and PDF notes have been…
Inspired by llamboladd's Spinning Daisy found on Thingiverse https://www.thingiverse.com/thing:5229296 I modified Jozarth's static prop into a spinning prop. This completes the military aircraft theme of the mixer. Shaft and prop were…
Darth Vader Artisan Figure stand 1:12 Scale
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The Artisan Spice Display Rack The Artisan Spice Display Rack is designed to elevate your kitchen aesthetic while keeping your entire spice collection neatly organized. Its clever modular design offers flexibility, allowing you to choose…
Introducing the Artisan Fresh 3D Printed Cheese Keeper – a revolutionary way to store your favorite cheeses with style and convenience! Designed with innovation in mind, this unique container boasts smart print-in-place snaplocks for an…
had issues where when sitting the inspector on the table made the liquid be offset and burn it.
Layer height 0.2, no support except for brim. Uses original screws. Looks very natural on the machine! Not like the glue on cable holders
This is a DIY lens hood and cap for the very capable TTArtisan 27mm F2.8 lens. This has been tested on my Fuji X-T5, no vignetting has been detected. It is friction mount, grabs onto the periphery of the little lens hood that comes with…
This is a set of parts I designed to relocate the stock spool holders for the Snapmaker Artisan, They allow the spools to be located inside the enclosure without the need for PTFE tubes which can cause drag on some filaments. The bar and…
Whatever your flavor of politics, The Bipartisan Banquet has a seat at the table for you! This unique 3D-printable set features a satirical take on the political landscape, reimagined as the ultimate fast-food menu. Each "plate" is a…
Ball Bearing Filament Holder (english) Upgrade to have a ball bearing filament holder that works for almost all types of filament rolls. So that the filament is unwound evenly and without much springy movement. Requires: 2x standard ball…
Lenshood for your Fujifilm Camera with this Lens. Its better then the original because you can loose the lenscap with force from the side. scale the cap in different sizes and prrint them out. you can print it bigger then it needs to be…
Cartisan Viel Bar Pro, Yocan Uni Pro 2 with a hole for accesories in the back. Front holds different size carts/disposables.
TT Artisan 100mm F/2.8 "Trioplan" to copal No.1 adapter Cover 6x9/instax wide after conversion
The Snapmaker Artisan is a HUGE machine and I recall finding a table to support it was a huge challenge. I made this design a couple of years ago and it continues to hold up great. I wanted to share it for others. It just uses 2x4s and…
Remix of https://www.thingiverse.com/thing:6401198 The beauty of this mount (as well as the original design) is that it mounts to the bed, keeping the print itself in a static frame of reference so you can actually get stable timelapse…
This is a reproduction of a "papier mache", artisanal turtle decoration made in Cuba. My daughter enjoyed the original to the point it got completely destroyed. Luckily I had taken pictures before its demise in order to reproduce it. You…
A holder that makes the work easier when decorating a candle! It can be used for candles with a diameter of 30 mm to 60 mm.
TTArtisan 35mm Viewfinder cold shoe since the original one included in the infidex files was too snug. Including the insert in this page too. print at .1mm and might have to sand/rub one corner of the insert to have a snug fit.
Elevate your interior with this stunning duo of 3D-printed geometric butterflies . Each piece features an intricate, lace-like mandala pattern that blends modern precision with artistic elegance. This set showcases two breathtaking…
Add a touch of modern sophistication to your home with this duo of 3D-printed geometric vases . Featuring a striking origami-inspired chevron pattern , these vases are a masterclass in contemporary design and digital craftsmanship. The…
Super simple stand for traps in Partisans army :) Makes you able to see all your remaining traps at once instead of picking them up one by one when searching
An all in one setup to show off your artisan keycaps and headphones!
A teleobjetive Bahtinov mask used to focus astrophotography. STL for Teleobjetive TTArtisan 500mm f.6.3
I wanted a squarehood for my TTArtisan 27mm 2.8 so i made my own. Looks are based of the squarehoods for other lenses. The squarehood is printed very easy and can be attached to the lens with a bit of double sided tape. I printed in ASA.
The 7Artisans 7.5mm fisheye is meant for APS-C, but by unscrewing the front element it is possible to remove the built in lens hood. This makes it a fisheye distored lens for full frame. This lens cap is meant to protect the front element…
Attention : élément de fusée amateur, risque d'explosion et de blessure grave en cas de mal-création. Se rapprocher d'un club pour le faire et monter petit à petit dans la complexité des systèmes. Ne jamais utiliser avec une quantité de…
Just in case you don't already understand, when using the Laser module, YOU are responsible for making sure the doors are closed as this does not add "Door open sensors" Steps 1 Print all parts and tools If you are going to install both…
Collier pour les partisans de l'équipe de France
Sleek, yet Simple This modern tool-holding container makes an excellent addition to any working space! The included shelf is an ideal place to keep high-frequency items always at the ready. Print Settings Any material and print settings…
Medieval Art - Wheelright Artisan Shop 3D printable model.
This is a slightly bigger version of my artisan keycaps case, which can found here: https://www.printables.com/de/model/136360-artisan-keycap-display-box Each spot is 19 x 19 mm and is printed in PLA layed down with no supports. Layer…
Seamless geared follow focus ring for a 7artisans 25mm f/1.8 MFT lens. The focus ring was made to work with DJI Ronin SC pro combo follow focus motor. The fit is a bit too tight so the ring needs to be sanded down to fit on the lens.…
A 3D printable MX Switch Fidget Cube. It's simply a cube with a mounted MX Switch and consists of three parts: a bottom part, a top part and a switch plate. The plate is top mounted to the top part. The cube is held together with magnets…
A 3D printable Artisan Case for a single 1U Keycap or 6.25U Spacebar. It uses an optional Tenting Base and can be used with an Acrylic Cover for added protection. It also features a conservative keycap stem holder to keep your Artisan…
Adapts the unusually Stereo Realist Camera's hot shoe (which has a large nub) so that the DOOMO meter can fit on Also raises up the meter so that the lens cover does not obstruct it.
I made this soap dish about 3 years ago of a model on Thingiverse . I've waited for the designer to import it here, but that hasn't happened. I think it is a very good design that needs to be shared here.
I made this to stop damaging my saddle bags carrying the charger. These just keep the mounting ears from digging in. I printed mine in PLA, I may reprint this in TPU to be software but I think being fillet on the edges is sufficient. For…
A 3x3 stand/case to show off your artisan keycaps on your desk. Angle is 15 degrees. Model is fairly parametric, as long as you want 3x3. Can change angle, height, size of squares, etc. in parameters Bumpons can be found here…
I recently found myself in need of a good way to protect artisan keycaps during shipping, so I broke out my calipers and designed this admittedly super simple box. I use half of a standard cotton ball in the top to keep the keycap from…
A lid to cover the KitchenAid and protect it from dust and water.
TT Artisan recently released 21 and 28mm viewfinders for Leica and other rangefinder cameras. The viewfinders are nicely made of metal and glass but don't include any sort of protection for the glass lenses. I created these caps to…
I created these caps to protect the lenses on my TTArtisan 28mm viewfinder. You may need to add a brim--the rear cap is somewhat small. Mine printed fine without but YMMV.
This is a remix of fns720's KitchenAid splash guards for the artisan series mixers. I have resized the model to fit the larger 5QT pro series mixers as well as included the original size for artisan mixers. I would recommend printing in…
