Spool Holder For Snapmaker Artisan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool Holder for the Snapmaker Artisan Enclosure. Use any 1, 3, 5 kg spool on the side of the enclosure.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Spool Holder for the Snapmaker Artisan Enclosure. Use any 1, 3, 5 kg spool on the side of the enclosure.
Use the included Rod or a piece of ¼ in rod to put 608 bearings and allow the spool to roll smoothly. This holder is entirely surface mounted and requires no modification of the enclosure to use. Hooks securely onto the top extrusion and the braces itself against the acrylic sides of the enclosure. I used 20% Gyroid infill and 4 wall loops for strength. Holds a 5kg spool without any signs of fatigue. May also work with a 10kg spool, depending on diameter.
Would also probably work with the A350.