KitchenAid Mixer 3 Attachment Hanger (single piece print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 275
- Wydruki
- 2
- Wyświetlenia
- 770
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer. Single piece print. The two countersunk holes are sized for #8 wood screw but a #6 will also work. I've found adhesives tend to come unstuck in this sort of application.
Printed in PETG with the flat side down and the large pegs straight up. I allowed snug supports under the smaller pegs that protrude from the large pegs. Awkward description, but hopefully you get the idea.
Fits the attachments well. The spacing is a little tight, so I found the attachments basically have to go in the order shown in the photos.