KitchenAid Mixer 3 Attachment Hanger (single piece print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 275
- Makes
- 2
- Views
- 770
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer. Single piece print. The two countersunk holes are sized for #8 wood screw but a #6 will also work. I've found adhesives tend to come unstuck in this sort of application.
Printed in PETG with the flat side down and the large pegs straight up. I allowed snug supports under the smaller pegs that protrude from the large pegs. Awkward description, but hopefully you get the idea.
Fits the attachments well. The spacing is a little tight, so I found the attachments basically have to go in the order shown in the photos.