1 / 6
Aero Bridge with Headlight Mount (parametric)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bridge to mount a headlight between aero bars.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 856
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
The bridge is designed to be fastened with 2 zip ties to round 22mm aero bar extensions which are 81mm apart. The light mount should be compatible with many available headlights (10mm width, bore for M6x25 bolt).
I printed this in PETG using modifiers at both ends and on the mount to make these parts solid and thus more durable.
I'm providing 2 models in STL, 3MF and Gcode with the mount sticking straight out and at 45 degrees.
All these measures can be changed using the following parameters in the Fusion 360 file:
| d | Diameter, use the same as your aero bar extensions. 22mm |
| width | Distance between the bars. 81mm |
| mountRotation | Angle of the mount, measured from z-axis. 45 degrees |
| mountThickness | Material thickness of the mount. 4mm |
| mountCutOut | Inner width of the mount. 10mm |
| mountLength | Length of the mount. 16mm |
| mountHeight | Height of the mount. 15mm |
| mountHole | Diameter of the borehole in the mount. 6mm |
| holeWidth / holeHeight | Size of the holes for the zip ties. 5x2mm |