yet another E3D V6 mount for ender 3 v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
coming back and imporving on the "yet another E3D V6 ender 3 Mount" project with improved design and tollerances
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 916
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
this bracket is intended to be a transitional mount for when you can print larger objects or to be your main one but i suggest having a toolhead with part cooling fan
printed on a ender 3 obviously, if you are going to print in pla i suggest having spares lying around. (3mf includes prusaSlicer settings for an ender 3 3mm nozzle)
you will need :
- 3 M3 screws (i used M3*6 mm and *20 to clamp it)
- 1 M3 nut (on the clamp)
this is the E3D v6 clone i used :
https://www.amazon.it/distanziatore-Estrusore-Accessori-estrusore-stampante/dp/B07SJQRKGC/ref=cm_cr_arp_d_product_top?ie=UTF8
BE AWARE OF HOTEND VOLTAGE, creality V4.2.2 operates at 24V and E3D v6 usually comes with a 12V heating element, just swap it with the original one before finalizing wiring.
suggested usage with my flat toolhead design:
(todo: insert link)
although with that you should print the nocable version
If that helped leave a like, I'm a broke student.