LED Ring Enclosure for Andonstar AD246S-M Microscope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using Adafruit's 24-led NeoPixel ring and a larger diameter, this one fits around the AD246S-M lenses.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of loopj's design. It's a bodge remix, could use some better modelling but good enough for my needs. When printing, use Gyoid infill pattern for better diffusion of light.
TinkerCAD available at https://www.tinkercad.com/things/gRitKLlQabl-led-ring-enclosure-for-andonstar-ad246s-m-microscope
Still uses Adafruit QT-PY RP2040 and https://github.com/loopj/microscope-ring-light for firmware.
Had trouble adjusting the height of the base and diffusion, had to print a few to adjust. Use thin wires for a better fit, mine were slightly too thick.