LED Ring Enclosure for Andonstar AD246S-M Microscope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using Adafruit's 24-led NeoPixel ring and a larger diameter, this one fits around the AD246S-M lenses.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 469
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of loopj's design. It's a bodge remix, could use some better modelling but good enough for my needs. When printing, use Gyoid infill pattern for better diffusion of light.
TinkerCAD available at https://www.tinkercad.com/things/gRitKLlQabl-led-ring-enclosure-for-andonstar-ad246s-m-microscope
Still uses Adafruit QT-PY RP2040 and https://github.com/loopj/microscope-ring-light for firmware.
Had trouble adjusting the height of the base and diffusion, had to print a few to adjust. Use thin wires for a better fit, mine were slightly too thick.