Over Engineered Dice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An over engineered dice that prints and plays well.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 700
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I built this dice to solve the problem with 3d printed dice that one face of the dice is printed against the print bed. I wanted to try and create a dice that wouldn't have any differences between the faces when printed.
This dice is printable without supports as long as you have good bed adhesion. I totally recommend printing with a brim to help increase bed adhesion. I also recommend 100% infill. This is a 19mm dice and should fit in any normal dice tower.
Print instructions
- Layers as small as you would like for best detail
- 100% Infill (It doesn't use much filament because it is so small but it makes it evenly weighted)
- Use a brim for increased bed adhesion
- Leave the dice oriented as it is in the STL on its edge.
I would love to see some remixes of this with better designs and see what you all come up with!