Over Engineered Dice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An over engineered dice that prints and plays well.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 62
- Makes
- 0
- Views
- 700
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial
I built this dice to solve the problem with 3d printed dice that one face of the dice is printed against the print bed. I wanted to try and create a dice that wouldn't have any differences between the faces when printed.
This dice is printable without supports as long as you have good bed adhesion. I totally recommend printing with a brim to help increase bed adhesion. I also recommend 100% infill. This is a 19mm dice and should fit in any normal dice tower.
Print instructions
- Layers as small as you would like for best detail
- 100% Infill (It doesn't use much filament because it is so small but it makes it evenly weighted)
- Use a brim for increased bed adhesion
- Leave the dice oriented as it is in the STL on its edge.
I would love to see some remixes of this with better designs and see what you all come up with!