Litehawk STORM Drone Motor Spur Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement miniature gears for the Litehawk STORM Drone
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement miniature gears for the Litehawk STORM Drone. I made this gear to fix my toy drone but almost as much to test how small I could print a working mechanical part. Turns out you can print some incredibly small stuff with surprising accuracy on the MINI+ (with a smaller nozzle)!
The gear works but rotation is not perfectly smooth, at least not when printed with a 0.25mm nozzle. The drone flies, though!
Printing Instructions
I strongly recommend using the pre-configured 3mf file because of multiple settings I had to tweak to make it print without any deformation (due to accumulated heat caused by quick printing at such a small size).
- Use the provided 3mf file as a starting point. The high skirt is there to prevent heat deformation.
- Print with a 0.25mm (or smaller) nozzle