Litehawk STORM Drone Motor Spur Gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement miniature gears for the Litehawk STORM Drone
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 137
- Makes
- 1
- Views
- 632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement miniature gears for the Litehawk STORM Drone. I made this gear to fix my toy drone but almost as much to test how small I could print a working mechanical part. Turns out you can print some incredibly small stuff with surprising accuracy on the MINI+ (with a smaller nozzle)!
The gear works but rotation is not perfectly smooth, at least not when printed with a 0.25mm nozzle. The drone flies, though!
Printing Instructions
I strongly recommend using the pre-configured 3mf file because of multiple settings I had to tweak to make it print without any deformation (due to accumulated heat caused by quick printing at such a small size).
- Use the provided 3mf file as a starting point. The high skirt is there to prevent heat deformation.
- Print with a 0.25mm (or smaller) nozzle