SPUR Gear and Pinion with 19 tooth pulley for belt driven 1/10 r/c drift car's
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars. Motor shaft 3.2mm spur…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars.
Motor shaft 3.2mm
spur gear shaft 4mmx27mm
I created this, because it's impossible to find pulley with 19 tooth.
I found 20 tooth pulley only, which is a bit to large, and makes the belts too tight.
The spur gear having larger toots, and it's looks like it will lasting longer, no any issues till now, and also much quieter than the smaller tooth gears.
The pinion gear don't need screws, it fits perfectly on a 3.2mm motor shaft.
I using PETG + Xingtongzhilian branded filament from amazon. It's cheap, and perfect for the job.
Print Settings
Printer Brand:
FlashForge
Printer:
Guider II
Rafts:
Yes
Supports:
Yes
Resolution:
04
Infill:
50
Filament: xingtongzhilian PETG + clear
Notes:
If you need a T20 Pulley to buy separately:
1. PULLEY: SNRC 125226-AL 1:10 RCAccessories 20T Fixed Pulley (Narrow) T3M V3M -ALU. (https://es.aliexpress.com/item/1005003801489818.html) 2. SHAFT 4mmx27mm: (https://es.aliexpress.com/item/1005004867277172.html) 3. SCREW'S: 3mmx16mm x4 Flathead hexagon.
(https://es.aliexpress.com/item/1005004014854342.html)
I recommend to using PETG or better.
(I used PETG+ xingtongzhilian filament from amazon, high accuracy, strong and cheap)
Category: R/C Vehicles