1 / 5
SPUR Gear and Pinion with 19 tooth pulley for belt driven 1/10 r/c drift car's — image 1
1 / 5

SPUR Gear and Pinion with 19 tooth pulley for belt driven 1/10 r/c drift car's

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars. Motor shaft 3.2mm spur…

Rating
0 / 5
Likes
17
Downloads
177
Makes
0
Views
987
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars.

Motor shaft 3.2mm

spur gear shaft 4mmx27mm

I created this, because it's impossible to find pulley with 19 tooth.

I found 20 tooth pulley only, which is a bit to large, and makes the belts too tight.

The spur gear having larger toots, and it's looks like it will lasting longer, no any issues till now, and also much quieter than the smaller tooth gears.

The pinion gear don't need screws, it fits perfectly on a 3.2mm motor shaft.

I using PETG + Xingtongzhilian branded filament from amazon. It's cheap, and perfect for the job.

Print Settings

Printer Brand:

FlashForge

Printer:

Guider II

Rafts:

Yes

Supports:

Yes

Resolution:

04

Infill:

50

Filament: xingtongzhilian PETG + clear


Notes:

If you need a T20 Pulley to buy separately:

1. PULLEY: SNRC 125226-AL 1:10 RCAccessories 20T Fixed Pulley (Narrow) T3M V3M -

ALU. (https://es.aliexpress.com/item/1005003801489818.html) 2. SHAFT 4mmx27mm: (https://es.aliexpress.com/item/1005004867277172.html) 3. SCREW'S: 3mmx16mm x4 Flathead hexagon.

(https://es.aliexpress.com/item/1005004014854342.html)

I recommend to using PETG or better.

(I used PETG+ xingtongzhilian filament from amazon, high accuracy, strong and cheap)

Category: R/C Vehicles

Tags