Showerhead holder with wall screw base - ball joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Showerhead holder with flexible ball joint. Screw and ball print in place. Single screw hole to attach it to the wall
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 194
- Wydruki
- 1
- Wyświetlenia
- 659
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi y'all
this is my design for the showerhead holder. I looked everywhere but couldn't find anything suitable for me.
The base has a single hole for m3 or m4 screws with a generous chamfer.
Simply screw the base to a hole on your wall, snap the ball in the cavity and rotate the nut on the base.
It stays in place with a fair amount of force (i have a really large showerhead).
Printed in Prusament PLA Galaxy Black
Probably works better in PETG
This is my first published design! If you enjoy it please leave a like and make!
Print the showerhead holder HORIZONTALLY.
Organic supports enabled
Layer height: 0,1 mm
Infill: 20%
Perimeters: 4
If you'd like to have commercial license please contact me