Showerhead holder with wall screw base - ball joint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Showerhead holder with flexible ball joint. Screw and ball print in place. Single screw hole to attach it to the wall
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 194
- Makes
- 1
- Views
- 659
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Hi y'all
this is my design for the showerhead holder. I looked everywhere but couldn't find anything suitable for me.
The base has a single hole for m3 or m4 screws with a generous chamfer.
Simply screw the base to a hole on your wall, snap the ball in the cavity and rotate the nut on the base.
It stays in place with a fair amount of force (i have a really large showerhead).
Printed in Prusament PLA Galaxy Black
Probably works better in PETG
This is my first published design! If you enjoy it please leave a like and make!
Print the showerhead holder HORIZONTALLY.
Organic supports enabled
Layer height: 0,1 mm
Infill: 20%
Perimeters: 4
If you'd like to have commercial license please contact me