JC Riser Creality K1 SpeedBump RE-REmixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the speedbump @emcee_nars made, but I felt that I have to improve it a little.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 165
- Wydruki
- 3
- Wyświetlenia
- 1240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You can print it like @emcee_nars recomended, or, like I did, cut the part in two and print it in the position in the photo.
The hinges printed in this position are much more strong and you need this. And the speedbump will not have any external supports and it'll look very nice in the end. The internal supports will not be a problem if they will not let a very clean surface. Nobody will see it :)
I made it from PETG - Solid Black from eSUN. I like their “Solid” series because these filaments are absolutely hydrophobic, strong and w/o any special requirements for printing.
Obvious, if you'll choose, like me, the 2 parts printing variant, then you'll have to use some glue to stick together the two parts.
NOTE: If you want, and only if you want, you can use it together with my chain link to raise the chain to the right height.
++++++++++++++++++++++++++++++
09.Mar.2024 - 3rd version.
06.Mar.2024 - 2nd version.
05.Mar.2024 - 1st release