Filament Spool Extension Cord Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use your old empty filament spools to wrap your extension cords, Christmas light strands, etc.
- Ocena
- 4,5 / 5
- Polubienia
- 91
- Pobrania
- 318
- Wydruki
- 2
- Wyświetlenia
- 2284
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Update: Checkout version 2 here:
A few easy-to-print parts that will help you make use of your old filament spools to wind up your extension cords, Christmas light strands, and other things around the garage.
Print settings:
0.25 or smaller layer height recommended
Handle requires “Normal” supports. Use “snug” fit in Orca slicer with top/bottom gap of 0.2mm.
Handle attaches with two M5 nuts, and two M5x20 screws.
This can be printed on an Ender 3 style printer (220x220) but will use nearly the whole bed. But I did it and confirmed that it can be done without issue. Just orient the “joint” pieces diagonally on the bed for fitment.
Pro Tip: Use a drop or two of vegetable oil (or Super lube if you have it) on the threads and they will turn pretty easily.
Post a comment if you have any feedback or questions!