1 / 4
Hue Play Bar 20º mount for Ikea Skadis — zdjęcie 1
1 / 4

Hue Play Bar 20º mount for Ikea Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

20º Skadis mount for the Philips Hue Play Bar

Ocena
5 / 5
Polubienia
27
Pobrania
145
Wydruki
2
Wyświetlenia
806
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a custom mount designed in Fusion360 for the Philips Hue Play bars adapted to fit on the Ikea Skadis panel, with a 20º angle.

There are two Skadis hook on the back and a hole to reach the screw keeping the bar in position. you can use the original screw from Philips.
Print it without support slicing it “upside down” to take advantage of the flat surface on top!

I printed PLA and works fine.

To manage the cables I designed these little cable clips which work without the need of zipties: https://makerworld.com/en/models/228336


There's a 45º angle version of the same design here: https://makerworld.com/en/models/230955


If you print this please post a make I'm gonna be happy to see i'm not the only one who wanted to hook the play bars on the Skadis!

Tagi