Elden Ring - Ranni Fan Art - Hueforge Filament Painting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elden Ring Fan Art I found of Ranni from Sakimichan
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my second Hueforge project, I found this fan art from Sakimichan. I did not create this and found it on a public website. I left the watermark on it to clearly state that this is not my creation and is NOT for commercial use in any shape or form!
I'm a huge Elden Ring fan and wanted to have some Art on my walls, more uploads will follow.
Settings:
0.4 mm Nozzle, textured plate, Bambu X1C
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Sunlu Matte Black
PLA Flashforge Burnt Titanium Blue-ish
PLA Sunlu APLA Grey
PLA Elegoo Sky Blue
PLA+ DAS FILAMENT Silver
PLA+ Esun Cold White
Swap Instructions:
Start with Matte Black
At layer #8 (0.64mm) swap to Burnt Titanium
At layer #11 (0.8mm) swap to Grey
At layer #13 (1.12mm) swap to Sky Blue
At layer #15 (1.44mm) swap to Silver
At layer #22 (1.84mm) swap to Cold White for the rest.
Use the .3mf file for exactly these filaments but change to what you've got in the slicer. For any other settings I used my thanks go to @Don Mantis because I used the same settings as for his art. You can use any color you like!
I got a little carried away with this one but I do really like it.