1 / 2
Smartphone holder for Acer Nitro XV272U monitor — zdjęcie 1
1 / 2

Smartphone holder for Acer Nitro XV272U monitor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Smartphone holder for this specific line of monitors, fitting 6.7" phones perfectly.

Ocena
0 / 5
Polubienia
0
Pobrania
23
Wydruki
0
Wyświetlenia
241
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Share Alike

This holder will fit the Acer Nitro XV272U and, most likely, any Acer Nitro of that line that got the center back screw below the display ports. 

Please be aware that you're going to need a screw of fitting length and width (or an appropriate washer) to mount it securely! The thickness of the screw indent is 4.33mm and 12.66mm wide in total.

When attaching carefully put it in place from below. Do not use too much force upwards but rather bend the model a tiny bit until the front lip slides over the edge to make sure not to damage your screen.

 

You can use any material, print worked for me without supports @ 100mm/s using a .4mm nozzle, your mileage may vary. I recommend using a small brim to make sure the model sticks for the whole printing process.

Tagi