Voron Disco/Daylight on a Stick LED Mount Tray With Snap-On Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Affix your PCB-based LED sticks to your 2020 extrusions in an elegant and fashionable way!
- Ocena
- 4,938 / 5
- Polubienia
- 166
- Pobrania
- 1168
- Wydruki
- 15
- Wyświetlenia
- 4175
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I couldn't find a model that would let me mount and hide my Disco-on-a-stick and Daylight-on-a-stick LED strips and hide the lights behind a tidy diffuser, so here it is.
The provided Step files are designed for a Voron 2.4 350, but I've also included the F3D file so you can resize it to fit your printer.
The tray is mounted to the 2020 extusion using T-nuts and M3x8 bolts.
The tray is designed to receive two Voron-spec heat set inserts (M3x5x4) to attach the stick.
I printed the tray out of black ASA and the diffuser out of transparent PETG using the standard voron print settings.
Make sure your printer/slicer are tuned to take ABS shrinkage into account! Those prints are very long and even a 0.5% difference in shrinkage will cause the holes not to align!
EDIT: Added 250/300 and Voron 0.X versions. They are untested, so let me know if there's an issue! I also updated the F3D source with better parameters, if you want to generate custom sizes.