1 / 3
Ghost S1 Top Hat (Parameterized)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parameterized top hat for the Ghost S1 SFFPC case.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1009
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (11)Powiązane
For reference, the official medium top hat is 25mm and my pictured print is 31mm.
BOM
| Part | Quantity | Notes |
|---|---|---|
| 10mm x 5mm x 2mm neodymium magnets | 4 | the ones I had on hand were 9.5x4.5x2 so you might want to test that part of the model before printing the whole thing |
| M3x10 bolt | 4 | in the range of 8-12 mm should, secures top hat to body through top plate |
| M4x12 bolts | 2 |
Notes
- I flipped my top plate around so the lips were sticking up, which line up with these tabs:
- This helps avoid flexing in the part
- if you don't want to use magnets, delete the feature called 'magnetmounts' in the .f3d file
- let me know if there are errors or questions!
Parameters
- to edit the parameters, use the .f3d file (Open in Fusion360, Modify > Change Parameters)
magnetLength: including tolerance, length of magnetsmagnetWidth: including tolerance, height of magnetsmagnetDepth: take a guesstopHatHeight: how tall the top hat will be- realistically any value, some Doug Dimmadome Ghost S1s would be fun to see :)
