MK3/3S/3S+ Upgrade to MiniK3.5(Support Latest Firmware 5.1, MK4 Style, MiniBear Extruder, Stock Mini Extruder Gear)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An interesting combination of Mini & MK3S+.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 1027
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Update: 2024.03.31
Upload Extruder Motor Plate print part.(missed on first laungh)
First Laungh
Introducing our clone upgrade kit for Original MK3/MK3S/MK3S+ or other MK3 serial clones. Inspired by MINI firmware 5.1,renowned for its high-speed printing and input shaper capabilities, why not elevate your MK3 to MINI firmware? By doing so, you'll transform it into a single-color printer akin to MK4, boasting exceptional print speed and quality, albeit without MMU support, all while saving money.
Here's all changes compare with MK3, but you can also keep your original xyz, just upgrade the BigBuddy board and Extruder(the PSU of some clones have lack of power, suggest to upgrade to more than 300w PSU)
Benefit for this upgrades:
1. 32bit board and Mini LCD
2. Latest Firmware Support(Hight Speed printing same as MK4, Input Shaper, Pressure Advance, Cancel Object)
3. WIFI/Ethernet remote access
X:
1. one of the rail upgrade to 9mm linear rail, using Long 9mm block.
2. Bear X print parts with 10mm bearing support.
Y:
1. Upgrade to 12mm linear rail(optional)
2. Upgrade to Original PRUSA MK4 Y belt print parts.
it's from jfromel's Y linear rail remix
https://www.printables.com/model/20284-y-axis-linear-rail-remix
Z:
1. Upgrade to 10mm rail & LM10UUL bearing(optional)
2. Upgrade to Original PRUSA MK4 Z print parts
3. Print TPU Pad instead of Rubber Pad.
E:
Upgrade to 9 deg Pancake Motor with stock gear.
It takes a huge works on extruder development, improve the filament sensor trigger, fitting the extruder gear, etc. Edit STL is a really hard work.
it's from Tomson Design for MiniBear Extruder.
https://www.printables.com/model/74874-mini-bear-stock-gear-extruder
Mainboard Case:
This is a simple remix from Boogie
https://www.printables.com/model/31558-big-einsy-case
PSU:
1. Upgrade to MeanWell LRS 350
2. Print part is from Frio on
https://www.thingiverse.com/thing:3329838
BigBuddy board:
The Buddy board was remixed too, as the heatbed has been much more powerful. Be noticed that you will got no support from this buddy board remix project. Please take your own risk.
Support both Original MK3 motor and new MK4 motor.
https://github.com/MX-RESEARCH/MX_Buddy_Board
Firmware:
Source Code: https://github.com/MX-RESEARCH/MX-Firmware-Buddy-5.1.2
1. Improve XY Input Shaper Freq default settings.
2. update logo
3. fix screen flashing
4. fix errors
5. increase unload filament length
6. lower hotend/bed mintemp to 0
7. increase maxtemp/safety margin for hotend
8. increase hotend fan speed
Upgrade kit: https://www.mxind.com/en/products/accessories/prusa-clone/minik3/mx-minik3-upgrade-kit/aff/1/?v=1c2903397d88&wmc-currency=USD
Download Firmware bbf: https://www.mxind.com/en/download/aff/1/?v=1c2903397d88
We're immensely grateful for the contributions from the Original PRUSA and wider community in making this upgrade possible. Thank you for your support!