Shruggie McShrugFace (Shrugman) Desk Thing (SPLIT) with STEP File
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a split and keyed version of the Shruggie McShrugFace (Shrugman) Desk Thing (with STEP file). The key is going…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is a split and keyed version of the Shruggie McShrugFace (Shrugman) Desk Thing (with STEP file).
The key is going to be a tight fit with 0.3mm clearance all around and 0.5mm clearance front to back. I also uploaded a smaller version of the key which is 0.4mm shorter in width to accommodate some poor bridging in the key slot if that happens. I used the normal key and it snapped together tightly with it, so I may not even glue it up.
Original here:
https://www.printables.com/model/79717-shruggie-mcshrugface-shrugman-desk-thing
Parts are not oriented for printing, they should need no supports. if you have a direct drive, you can likely get rid of small scraps of black filament, since the black parts of the print only require about 1.1m of filament (as designed).
If you print one, please post a make, or whatever.
\_ (ツ)_/
Thanks for looking, and if you like this thing, please like it or download it (which helps to get me closer to my first free spool of Prusament). Or you can check out my site, to see what other projects are in the works.
How I Designed This
This was designed with ViaCAD V9
Category: Sculptures