Arkham Horror LCG Magnetic Token Tray/Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This token box/tray is for the Arkham Horror Living Card Game tokens that are used during the game. Uses 6x3mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 866
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This token box/tray is meant for the Arkham Horror Living Card Game tokens that are used during the game. I didn't include any room for the Chaos tokens that aren't in the Chaos Bag. I've included a blank lid in case you don't like the design of the Elder sign.
I got the idea from Jeff510's Wingspan Token Box (https://www.thingiverse.com/thing:4657781). I'm using the same magnets that he uses.
The magnets are measured to be 6mm x 3mm. The holes in the model are 6.1mm diameter, I find this to be a good fit. I don't need to scrape away any material to fit the magnets in, but there is no need for adhesives either. Depending on your printer's tolerances, you may have to force it a little, or use adhesive, but this works great for me.
I also made the holes on top 3.2mm deep, but for holes on the bottom of the lid and top tray I made them 3.3mm deep (to compensate for the slight droop from the bridge. This is so the magnets can fit flush with the surface.
This is where I got my magnets, but I know that there are lower quantities available elsewhere. https://www.amazon.com/dp/B07873ZCY4?psc=1&ref=ppx_yo2ov_dt_b_product_details
Everything fits well, but the heart tokens seemed a bit snug, so I uploaded an .stl that is 2mm taller than what I use. I put the 3 and 5 resource tokens together; I was able to easily fit them all with the 5s up against the side as shown.