1 / 2
Sovol SV07 Hot End Fan mount replacement — zdjęcie 1
1 / 2

Sovol SV07 Hot End Fan mount replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement for the factory fan mount without fan duct.

Ocena
0 / 5
Polubienia
14
Pobrania
78
Wydruki
0
Wyświetlenia
766
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Sovol SV07 Hot End fan mount

A replacement mount for the hotend / printhead fan mount on the Sovol SV07. The original fan duct crashes into the model easily & breaks itself and the model.

As there is an auxiliary fan on the SV07 I did not target the most focused airflow across the nozzle, but rather aimed to make the model as simple and easy to print as possible.

Brass inserts for the 2mm screws for the fan are needed, as the fan mounting holes are 3,2mm in diameter (5mm deep).

Original fan mount screws fit through the chamfered holes, but some reaming may be necessary.

I printed mine at 0.2 mm layer height, PETG (temperatures 235, 85) for additional heat resistance even though the parts do not come close to the nozzle itself.

Tagi