1 / 2
Sovol SV07 Hot End Fan mount replacement — image 1
1 / 2

Sovol SV07 Hot End Fan mount replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement for the factory fan mount without fan duct.

Rating
0 / 5
Likes
14
Downloads
78
Makes
0
Views
766
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Sovol SV07 Hot End fan mount

A replacement mount for the hotend / printhead fan mount on the Sovol SV07. The original fan duct crashes into the model easily & breaks itself and the model.

As there is an auxiliary fan on the SV07 I did not target the most focused airflow across the nozzle, but rather aimed to make the model as simple and easy to print as possible.

Brass inserts for the 2mm screws for the fan are needed, as the fan mounting holes are 3,2mm in diameter (5mm deep).

Original fan mount screws fit through the chamfered holes, but some reaming may be necessary.

I printed mine at 0.2 mm layer height, PETG (temperatures 235, 85) for additional heat resistance even though the parts do not come close to the nozzle itself.

Tags